Yamaha TT-R125(T), Руководство по эксплуатации для владельца

Страница: 154 / 610

2 - 28
SPEC
1
Air vent hose
2
Spark plug lead
3
Starter cable
4
Throttle cable
5
Clutch cable
6
Clamp
7
Cable guide
8
Engine oil breather hose
9
Overflow hose
Å
After clamping the starter cable, push it against the starter plunger.
ı
Put the tip of the air vent hose into the main pipe.
Ç
Install the primary coil terminal (orange) to the ignition coil.
Î
Fasten the ground lead together with the ignition coil.
‰
Pass the starter cable so that it is not twisted.
Ï
Tighten the starter choke nut while taking care not to twist the starter cable.
Ì
Pass the clutch cable on the inside of the throttle and starter cable.
Ó
Clamp the clutch cable with the paint in the cable guide bottom recess.
È
Pass the throttle cable and starter cable into the cable guide.
Ô
Pass the engine oil breather hose and overflow hose between the right
half of the swingarm and pillar tube.

Clamp the engine oil breather hose, overflow hose and air vent hose to 2 clicks.
CABLE ROUTING DIAGRAM
0
Fuel tank breather hose
A
Hose guide
Ó
Pass the f uel tank breather hose trought the hose guide