Perio
d
ic maintenance an
d
a
d
justment
7-11
7
7. Install and tighten the engine oil
filler cap.
8. Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking,
immediately turn the engine off
and check for the cause.
9. Turn the engine off, and then
check the oil level and correct it if
necessary.
EAU41638
Cleanin
g
the air filter element
The air filter element should be cleaned
or replaced at the intervals specified in
the periodic maintenance and lubrica-
tion chart. Clean or, if necessary, re-
place the air filter element more
frequently if you are riding in unusually
wet or dusty areas.
To clean the air filter element
1. Remove panel A. (See page 7-7.)
2. Remove the air filter case cover by
removing the screws.
3. Pull the sponge material and the
air filter mesh out.
4. Clean the mesh with solvent, and
then wipe the solvent off.
5. Clean the sponge material with
solvent, and then squeeze the re-
maining solvent out.
WARNING!
Use only a
d
e
d
icate
d
parts
cleanin
g
solvent. To avoi
d
the
risk of fire or explosion,
d
o not
use
g
asoline or solvents with a
low flash point.
[EWA10432]
NOTICE:
To avoi
d
d
ama
g
in
g
the foam
material, han
d
le it
g
ently an
d
carefully, an
d
d
o not twist or
wrin
g
it.
[ECA10512]
1. Engine oil filler cap
2. O-ring
2
1
1. Air filter case cover
2. Screw
2
1
1. Sponge material
2. Air filter mesh
1
2
UBMA11E0.book Page 11 Tuesday, April 12, 2022 2:41 PM
