Yamaha TT-R TT250R, Руководство пользователя

Страница: 50 / 94

6-10
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5
6
7
8
9
1
2
6. Remove the oil filter element and
O-rings.
7. Check the O-rings for damage
and replace them if necessary.
8. Clean the oil filter element with
solvent, and then install it.
NOTE:
Check the oil filter element for dam-
age and replace it if necessary.
9. Install the oil filter element cover
by installing the oil filter element
cover bolts, then tightening them
to the specified torque.
1. Oil filter element
2. O-ring (
×
3)
EC000066
c C
8
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives
with the oil.
8
Make sure that no foreign
material enters the crankcase.
Recommended engine oil:
See page 8-1.
Oil quantity:
Without oil filter element
removal:
1.1 L
With oil filter element removal:
1.2 L
Total amount (dry engine):
1.45 L
10. Install the oil filter element drain
bolt, and then tighten it to the
specified torque.
NOTE:
Make sure that the O-rings are prop-
erly seated.
11. Install the engine oil drain bolt,
and then tighten it to the speci-
fied torque.
Tightening torque:
Engine oil drain bolt:
20 Nm
(2.0 m
0
kg, 14.5 ft
0
lb)
Tightening torque:
Oil filter element cover bolt:
10 Nm
(1.0 m
0
kg, 7.2 ft
0
lb)
Tightening torque:
Oil filter element drain bolt:
10 Nm
(1.0 m
0
kg, 7.2 ft
0
lb)
12. Add the specified amount of the
recommended engine oil, and
then install and tighten the oil
filler bolt.
4PX-9-26-6(AUS) 7/25/00 5:27 PM Page 11