Yamaha TT-230RA Скачать руководство пользователя страница 21

Страница: 21 / 80

INSTRUMENT AND CONTROL FUNCTIONS

4-5

EAU13412

Fuel tank breather hose

Before operating the motorcycle:

●

Check the fuel tank breather hose
connection.

●

Check the fuel tank breather hose
for cracks or damage, and replace
it if damaged.

●

Make sure that the fuel tank
breather hose is not blocked, and
clean it if necessary.

EAU13561

Fuel cock

The fuel cock supplies fuel from the
tank to the carburetor while filtering it al-
so.
The fuel cock has three positions:

OFF

With the lever in this position, fuel will
not flow. Always return the lever to this
position when the engine is not running.

With the lever in this position, fuel flows
to the carburetor. Normal riding is done
with the lever in this position.

RES

1. Fuel tank breather hose

1. Arrow mark positioned over “OFF”

1. Arrow mark positioned over “ON”

1. Arrow mark positioned over “RES”

U1C617E0.book Page 5 Wednesday, April 14, 2010 10:27 AM

Содержание TT-230RA

















































































Результаты поиска

Содержание TT-230RA

Отзывы:

Похожие инструкции для TT-230RA

Бренды по названию

Популярные бренды

Yamaha TT-230RA, Руководство пользователя

Результаты поиска

Содержание TT-230RA

Отзывы:

Похожие инструкции для TT-230RA

Бренды по названию

Популярные бренды