USING THE “DTA Controller” APPLICATION FOR THE iPod touch/iPhone/iPad
16
En
Switching the alarm on/off
When the set time arrives, the selected alarm sound will play. During playback, the following operations are available.
To pause the alarm (Snooze)
To turn the alarm off
By using the free “DTA Controller” application for the iPod touch/iPhone/iPad, you can control this unit and make detailed
alarm settings. For example, for each day of the week, you can specify the alarm time (Weekly Alarm) and adjust the
IntelliAlarm as desired.
The front panel display shows information for the Weekly Alarm you’ve set.
For details of “DTA Controller”, refer to the product information in the Yamaha website.
Press
ALARM
to turn the alarm on/off.
When the alarm is on, the alarm indicator (
) will
light, and the alarm time will be shown.
If you press
ALARM
again, the alarm indicator (
)
and the alarm will turn off.
When the unit is in power saving,
the alarm will not function
(
P. 5).
Operations while the alarm sound is playing
Press
SNOOZE/SLEEP
.
Snooze will stop the alarm and play it again 5 minutes
later.
If BEEP is set as the alarm type, you can press
SNOOZE/SLEEP
once to stop the beep sound, and twice to
stop the audio source.
Five minutes after the audio source is stopped, it will start fading
in again and the beep sound will resume.
Press
ALARM
or
.
• You can also stop the alarm by holding down
SNOOZE/
SLEEP
.
• If you don’t stop the alarm, it will stop automatically after
60 minutes and the system will turn off.
• The alarm setting will be saved even if the alarm is turned off.
If the alarm is turned on again by pressing
ALARM
, the alarm
will sound with the previous alarm settings.
USING THE “DTA Controller” APPLICATION FOR THE iPod touch/iPhone/iPad
MON
TUE
WED
THU
FRI
SAT
SUN
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday