background image

15 

En

PLAYER SECTION

AUX IN

• Input connector

............STEREO L/R: 3.5 mm (1/8 in) STEREO mini Jack

AMPLIFIER SECTION

• Maximum output power .......................... 4 W + 4 W + 8 W

(6 

Ω

 1 kHz, 10% THD)

• Driver unit ...................4 cm (1 5/8 in) full-range driver × 2

5.5 cm (2 1/8 in)  SR-Bass × 1

Bluetooth

 SECTION

Bluetooth

 version...........................................Ver. 2.1+EDR

• Supported protocols.....................................A2DP, AVRCP
• Supported codecs................................................ SBC, AAC
• Wireless output

.........................................Bluetooth

 Class 2

• Maximum communication distance

...................................... 10 m (33 ft) (without obstructions)

• Supported contents protection .................. SCMS-T method

TUNER SECTION

• Tuning range

FM....................................................87.5 to 108.0 MHz

CHARGING CONNECTOR SECTION

• Connector type.................................................. USB type A
• Output rating .........................................................5 V/2.1 A

NFC (Near Field Communication) 
SECTION

• Supported model

.............................NFC-ready Android device Ver. 4.1, 4.2

* Some models may not work or be different in the required 

distance for connection.

GENERAL

• Power Supply........................... AC 100 to 240 V, 50/60 Hz
• Power consumption .....................................................22 W
• System off consumption .............................................1.9 W
• Standby consumption...................................... 0.5 W or less
• Dimensions (W × H × D)....................210 × 110 × 144 mm

(8 1/4 × 4 3/8 × 5 5/8 in)

• Weight......................................................... 1.4 kg (3.1 lbs.)

Specifications are subject to change without notice.

Bluetooth

Bluetooth

 is a technology for wireless communication 

between devices within an area of about 10 meters (33 ft) 
employing the 2.4 GHz frequency band, a band which can 
be used without a license.

Bluetooth

 is a registered trademark of the 

Bluetooth

 SIG 

and is used by Yamaha in accordance with a license 
agreement.

Handling 

Bluetooth

 communications

• The 2.4 GHz band used by 

Bluetooth

 compatible devices 

is a radio band shared by many types of equipment. While 

Bluetooth

 compatible devices use a technology 

minimizing the influence of other components using the 
same radio band, such influence may reduce the speed or 
distance of communications and in some cases interrupt 
communications.

• The speed of signal transfer and the distance at which 

communication is possible differs according to the 
distance between the communicating devices, the 
presence of obstacles, radio wave conditions and the type 
of equipment.

• Yamaha does not guarantee all wireless connections 

between this unit and devices compatible with 

Bluetooth

 

function.

For U.K. customers

If the socket outlets in the home are not suitable for the plug 
supplied with this appliance, it should be cut off and an 
appropriate 3 pin plug fitted. For details, refer to the 
instructions described below.

The plug severed from the mains lead must be destroyed, as a 
plug with bared flexible cord is hazardous if engaged in a live 
socket outlet.

Special Instructions for U.K. 
Model

SPECIFICATIONS

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED 
IN ACCORDANCE WITH THE FOLLOWING 
CODE:

Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured 
markings identifying the terminals in your plug, 
proceed as follows:
The wire which is coloured BLUE must be connected 
to the terminal which is marked with the letter N or 
coloured BLACK. The wire which is coloured 
BROWN must be connected to the terminal which is 
marked with the letter L or coloured RED. 
Make sure that neither core is connected to the earth 
terminal of the three pin plug.

Note

Содержание TSX-B72





















Отзывы: