En
5
Failure to observe this may cause injuries or damage to the equipment.
• Avoid pulling the connected cables to prevent injuries or damage to the unit by causing it to
fall.
Battery use
• Do not use batteries other than specified batteries.
Doing so may cause fire or burns, or result in fluid leakage that may cause skin
inflammation.
• Do not put in a pocket or bag, carry, or store batteries together with pieces of metal. The
battery could short, burst, or leak, causing a fire or injury.
• Always make sure all batteries are inserted in conformity with the +/- polarity markings.
Failure to do so might result in a fire, burns, or inflammation due to fluid leaks.
• When the batteries run out, or if the unit is not to be used for a long time, remove the
batteries from the remote control to prevent possible leakage of the battery fluid.
• When storing or discarding batteries, insulate the terminal area by applying tape, or some
other protection. Mixing them with other batteries or metal objects can cause a fire, burns,
or inflammation due to fluid.
Notice
Indicates points that you must observe in order to prevent
product failure, damage or malfunction and data loss.
Power supply
• If not using the unit for a long period of time, be sure to pull the power plug from the outlet.
Even if this unit is turned of by [
z
] (Standby/On), a minute current is still flowing.
Installation
• Do not use this unit in a location that is exposed to direct sunlight that becomes extremely
hot, such as near a heater, or extremely cold, or that is subject to excessive dust or
vibration. Failure to observe this may cause the unit's panel to become deformed, the
internal components to malfunction, or for operation to become unstable.
• If using a wireless function, avoid installing this unit near metal walls or desks, microwave
ovens, or other wireless network devices. Obstructions could shorten the transmission
distance.
• Do not place magnetically sensitive items (watch, debit or credit card, etc.) on the unit.
Connections
• If connecting external units, be sure to thoroughly read the manual for each unit and
connect them in accordance with the instructions.
Failure to properly handle a unit in accordance with the instructions could cause
malfunctions.
Handling
• Do not place vinyl, plastic, or rubber products on this unit. Failure to observe this may cause
discoloration or deformation in the panel of this unit.
• If the ambient temperature changes drastically (such as during unit transportation or under
rapid heating or cooling) and there is a chance condensation may have formed in the unit,
leave the unit for several hours without turning on the power until it is completely dry before
use. Using the unit while there is condensation can cause malfunctions.
Maintenance
• When cleaning the unit, use a dry, soft cloth. Using chemicals such as benzine or thinner,
cleaning agents, or chemical scrubbing cloths can cause discoloration or deformation.
About disposal
• Be sure to discard used batteries in accordance with local regulations.
Information
About the name plate of the unit
About content in this manual
• The illustrations and screens in this manual are for instructional purposes only.
• The company names and product names in this manual are the trademarks or registered
trademarks of their respective companies.
• Software may be revised and updated without prior notice.
The model number, serial number, power requirements, etc., may be found on or near the
name plate, which is at the bottom of the unit.
You should note this serial number in the space provided below and retain this manual as
a permanent record of your purchase to aid identification in the event of theft.
Model No.
Serial No.
(bottom_en_01)
GWSB$9B76;%BVEB&$/B(Q)U(VERRN࣮࣌ࢪ㸰㸮㸯㸷ᖺ㸯㸮᭶㸱㸮᪥ࠉỈ᭙᪥ࠉ༗ᚋ㸱㸱㸶ศ
