Yamaha TSX-B235D Скачать руководство пользователя страница 8

Страница: 8 / 32

ADJUSTING THE TONE (remote control only)

During playback, press the

LOW

MID

, or

HIGH

button on the remote control.

Select the tone to be adjusted (LOW, MID, HIGH).

Press

to adjust the tone.

Press

ENTER

on the remote control to

complete the operation.

You can also press the EQ button that you pressed in
Step

to complete the settings.

If you want to adjust another frequency band, return to
step

and press the EQ button for the frequency

band that you want to adjust.

ADJUSTING THE BRIGHTNESS OF THE FRONT PANEL

DISPLAY (remote control only)

Press

DIMMER

repeatedly on the remote

control.

The brightness of the front panel display will change in
the order shown below.

AUTO

(bright)

(medium)

(dim)

back to AUTO

When AUTO is set, the brightness of the front panel display is
adjusted automatically with the Illumination sensor (

☞

P. 3).

Ensure that the sensor is not covered.

CHARGING WITH THE CHARGING PORT

Connecting a USB device such as a smartphone or tablet
computer to the CHARGING port on this unit charges the
connected device (power supply of up to 5V/1.0A is
supported). Charging is possible even when the unit is
off.

Prepare a USB cable that is compatible with the USB
device.

• Charging may not be possible depending on the USB device.
• Yamaha will not be held responsible for any damage to the

USB device or data loss occurred while using this unit.

TSX-B235_AB_En.book Page 6 Wednesday, May 13, 2015 5:27 PM

Содержание TSX-B235D

































Результаты поиска

Содержание TSX-B235D

Отзывы:

Похожие инструкции для TSX-B235D

Бренды по названию

Популярные бренды

Yamaha TSX-B235D, Руководство пользователя

Результаты поиска

Содержание TSX-B235D

Отзывы:

Похожие инструкции для TSX-B235D

Бренды по названию

Популярные бренды