11
En
LISTENING TO FM/AM STATIONS
Eng
lish
If any of the following operations are performed while a
Bluetooth
connection is being used, the
Bluetooth
connection will be
disconnected.
• Hold down
source button on this unit or on the remote control.
• Turn the system off.
• Turn off the
Bluetooth
setting of the other component.
When you connect an iPod touch/iPhone/iPad via
Bluetooth
, the
Bluetooth
connection may be disconnected if you switch the audio source to
iPod or USB while another iPod/iPhone/iPad is connected.
Connect the antenna if you want to listen to the FM/AM (
P. 3).
[AM radio is available only for U.S.A. model.]
Display information
If you press
DISPLAY
on the remote control, the information shown on the front panel display will be switched in the
following order.
Disconnecting a
Bluetooth
connection
LISTENING TO FM/AM STATIONS
Selecting an FM/AM station
1
Press the
RADIO
source button repeatedly
to switch the audio source to FM or AM.
You can also switch the audio source by pressing
RADIO
on
the remote control.
2
Tuning FM/AM stations.
Automatic tuning: Press and hold
TUNING
/
.
Manual tuning: Press
TUNING
/
repeatedly.
If you tune to a station manually while receiving FM, the
sound will be monaural.
AUX
USB
CD
iPod
RADIO
1
2
Preset number and frequency
Reception status*
* Examples of reception status indication (the STEREO/MONO indication is not shown while receiving an AM broadcast).
TUNED/STEREO:
A strong FM stereo broadcast is being received.
TUNED/MONO:
Receiving an FM broadcast in monaural (even if the FM broadcast is stereo, reception will be
monaural if the signal is weak).
Not TUNED:
No broadcast is being received.