Yamaha TRACER MTT850 Скачать руководство пользователя страница 38

Страница: 38 / 110

Instrument an

control functions

3-23

TCS “2”

: Maximizes traction control

assist; wheel spin is most strongly con-
trolled.

TIP



When the vehicle is turned on,
traction control is turned on and
set to “1” or “2” (whichever was
last selected).



Turn the traction control system
off to help free the rear wheel if the
vehicle gets stuck in mud, sand, or
other soft surfaces.

NOTICE

ECA16801

Use only the specifie

tires. (See

e 6-16.) Usin

ifferent size

tires will prevent the traction control
system from controllin

tire rotation

accurately.

Settin

the traction control system

WARNING

EWA15441

Be sure to stop the vehicle

efore

makin

any settin

chan

es to the

traction control system. Chan

settin

s while ri

can

istract the

operator an

increase the risk of an

acci

ent.

TCS settings can be changed only
when the vehicle is stopped and the
throttle closed.



Push the “TCS” button to change
between TCS settings “1” and “2”.



Push the button for two seconds
to turn the traction control system
off.



Push the button again to turn trac-
tion control back on (TCS will re-
turn to the previous setting).

Resettin

the traction control sys-

tem

The traction control system will auto-
matically disable when:



a wheel comes off the ground
while riding.



excessive rear wheel spin is de-
tected while riding.



a wheel is rotated by external forc-
es with the vehicle power on (such
as when performing mainte-
nance).

If the traction control system is dis-
abled, both the “

” indicator light and

the “

” warning light will come on.

Should this occur, try resetting the sys-
tem as follows.

1. Stop the vehicle and turn the vehi-

cle off.

2. Wait a few seconds and then turn

the vehicle back on.

3. The “

” indicator light should

turn off and the system be en-
abled.

1. TCS display
2. Traction control system indicator light “

”

3. Engine trouble warning light “

”

UB5CE1E0.book Page 23 Monday, August 6, 2018 1:13 PM

Содержание TRACER MTT850















































































































Результаты поиска

Содержание TRACER MTT850

Отзывы:

Похожие инструкции для TRACER MTT850

Бренды по названию

Популярные бренды

Yamaha TRACER MTT850, Руководство пользователя

Результаты поиска

Содержание TRACER MTT850

Отзывы:

Похожие инструкции для TRACER MTT850

Бренды по названию

Популярные бренды