Yamaha Thunderace YZF1000R, Руководство пользователя

Страница: 58 / 108

PERIODIC MAINTENANCE AND MINOR REPAIR
6-13
6
4. Add coolant or distilled water to
raise the coolant to the specified
level, close the coolant reservoir
cap, and then install the rider seat.
EC000080
CAUTION:
_
●
If coolant is not available, use
distilled water or soft tap water
instead. Do not use hard water
or salt water since it is harmful
to the engine.
●
If water has been used instead
of coolant, replace it with cool-
ant as soon as possible, other-
wise the engine may not be
sufficiently cooled and the cool-
ing system will not be protected
against frost and corrosion.
●
If water has been added to the
coolant, have a Yamaha dealer
check the antifreeze content of
the coolant as soon as possible,
otherwise the effectiveness of
the coolant will be reduced.
_
EW000067
WARNING
_
Never attempt to remove the radia-
tor cap when the engine is hot.
_
NOTE:
_
●
The radiator fan is automatically
switched on or off according to the
coolant temperature in the radia-
tor.
●
If the engine overheats, see
page 6-42 for further instructions.
_
EAU03948*
Cleaning the air filter element
The air filter element should be cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
Clean the air filter element more fre-
quently if you are riding in unusually
wet or dusty areas.
1. Remove the rider seat. (See page
3-11 for rider seat removal and in-
stallation procedures.)
2. Remove cowling B from both
sides. (See page 6-5 for cowling
removal and installation proce-
dures.)
3. Remove the fuel tank bolts.
Coolant reservoir capacity:
0.23 L
1. Bolt (
×
2)
E_4sv.book Page 13 Friday, November 10, 2000 3:03 PM