THR30IIA Wireless
Reference Manual
5
Names and Functions
!0
[EFFECT] knob
Selects the effect type and amount applied to the guitar sound from [GUITAR]
!5
jack. Selects one of three dif-
ferent effects: CHORUS, CHORUS/DELAY*
1
, or DELAY*
1
. Turn the knob clockwise*
2
to increase the amount
of each effect.
*
1
When CHORUS/DELAY or DELAY is selected, the [TAP/TUNER] button e can be used to set the delay time.
*
2
Turn the knob fully counterclockwise to set the effect OFF.
!1
[REVERB] knob
Selects one of two different reverbs: SHORT and LONG.
Turn the knob clockwise to increase the amount of each reverb. Turn the knob fully counterclockwise to set the
effect OFF.
!2
[VOLUME] knob
Adjusts the overall volume of the guitar sound. This knob’s setting has no effect on the signal sent to the [USB]
jack
!3
. The volume output to the [LINE OUT] [L] [R] jack is constant regardless of the setting of the [VOL-
UME] knob.
!3
[MIC/INST REVERB] knob
Adjusts the reverb amount for audio from the mic or electronic instrument connected to the [MIC/INST] jack
!8
.
Turn the knob clockwise to increase the amount of reverb.
!4
[MIC/INST VOLUME] knob
Adjusts the volume from the mic or electronic instrument connected to the [MIC/INST] jack
!8
.
!5
[GUITAR] jack
This is a standard phone jack used to connect* a guitar to the THR30IIA Wireless. The [GUITAR] jack starts
charging the Relay G10T automatically when the Relay G10T is connected.
* The optimal transmission channel is set automatically when the Relay G10T to the [GUITAR] jack has been connected for at
least 10 seconds.
!6
[PHONES] jack
This is a stereo mini phone jack used to connect* stereo headphones to the THR30IIA Wireless.
* Speaker sound is muted when a plug is inserted into the [PHONES] jack.
!7
[AUX] jack
This is a stereo mini phone jack used to connect* an external audio device to the THR30IIA Wireless.
* The signal received at the [AUX] jack is not sent to the [USB] jack
@5
.
!8
[MIC/INST] jack
For connection* to a microphone or electronic instrument. This jack can be connected to both XLR-type and
phone-type (balanced/unbalanced) plugs.
!9
[GAIN] knob
Adjusts the input signal level of the [MIC/INST] jack.
@0
[USER MEMORY] [1] [2] [3] [4] [5] button
Saves up to five sets of guitar section controller settings (TONE BLEND, BASS, MIDDLE, TREBLE, EFFECT,
REVERB), STEREO IMAGER setting , and a mic/inst section controller setting (MIC/INST REVERB).
Press and hold the [USER MEMORY] button of the corresponding number for saving your settings (for about 2 sec-
onds). The save operation is complete when the memory number for the button being pressed appears in the LED
Display
w
. Press the desired numbered button (for less than 2 seconds) to recall the saved settings.
