PRODUCT INSTALLATION
A. Unpack and remove accessories
a. Unpack the packaging tape and move upward of the outer box.
b. Move down the side board box at the top. Then remove the Styrofoam on each side.
c. Remove the accessory box for use.
d. The content of accessory box is Controller, controller stand, user
’s manual and power wire.
B. Assembly the side board
a. Remove the side board package box and take out the side board
b. Connect the air hosts of side board and one side of the frame. Please notice of inserting the
hosts to the connector as deep as you can in case of leaking.
c. Alignment the holds of side board and one side of the frame. And insert the iron plates into the
correspond place on the frame. Then tighten the screws. Do the same to the other side.
d. Arrange smoothly the massage chair after complete the installation of side board.
P.7
