Toolbar
Reference Manual
TF Series
- 28 -
2
Confirmation section
Store/Recall
: When turned on, a confirmation message is displayed when you store and
recall features.
INPUT Select/OUTPUT Patch
: When turned on, a confirmation message is displayed
when you change the input selection or OMNI OUT
patching.
3
Help section
Help Language
: Determines the language used when displaying the HELP screen.
Show Help at Startup
: Determines whether the HELP screen is displayed automatically
after the console starts up.
4
Others section
Touch Sensing Area Optimization
: Allows you to optimize the touchscreen's
sensitivity.
Stand
: Optimized for operating the touchscreen
when you are positioned above it, such as
when standing.
Sit
: Optimized for operating the touchscreen
when you are positioned below it, such as
when sitting.
[TAP] Key Blink (V2.0 and later)
: Allows you to turn the flashing [TAP] key on or off.
The [TAP] key can be used to tap the tempo even
when the flashing is turned off.
Display Delay Scale (V2.5 and later):
You can select the desired units (meters, feet,
milliseconds) that are displayed in the MATRIX
channel DELAY box.
[HOME] Key (V3.0 and later)
: Allows you to choose what is displayed when you press
the Home key (
) to display the OVERVIEW screen.
You can choose CH Strip, Fader, or Both. When Both is
selected, you can switch between the CH STRIP section
and FADER section by pressing the Home key (
).
Configuring settings in the PREFERENCE screen
1.
Use the buttons on the PREFERENCE screen to configure the settings as desired.
2.
When finished, touch the close button ([X]).
