Yamaha Tenere 700 2023, Руководство пользователя

Страница: 36 / 114

Instrument an d control functions
4-18
4
2. Remove the bolts with the hexa-
gon wrench.
3. Lift the rear of the rider seat and
pull it backward.
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then place the seat
in the original position.
2. Install the bolts with the hexagon
wrench.
3. Insert the hexagon wrench back
into its holder on the rider seat.
4. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
EAU90940
A d justin g the hea d li g ht b eams
The headlight beam can be adjusted to
raise or lower the height of the head-
light beams. It may be necessary to ad-
just the headlight beams to increase
visibility and help prevent blinding on-
coming drivers when carrying more or
less load than usual. Obey local laws
and regulations concerning headlight
adjustment.
If headlights require adjustment, con-
sult a Yamaha dealer.
1. Hexagon wrench
1. Bolt
1
1
1. Projection
2. Seat holder
1
2
UBMB10E0.book Page 18 Monday, August 22, 2022 1:08 PM