background image

 

2

 

   T5n/T4n/T3n Owner’s Manual

 

The above warning is located on the top of the unit.

 

Explanation of Graphical Symbols

 

The lightning flash with arrowhead symbol 
within an equilateral triangle is intended to alert 
the user to the presence of uninsulated 
“dangerous voltage” within the product’s 
enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock to persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the product.

 

IMPORTANT SAFETY INSTRUCTIONS

 

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.

8

Do not install near any heat sources such as radiators, 
heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.

9

Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If 
the provided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete outlet.

10

Protect the power cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the 

point where they exit from the apparatus.

11

Only use attachments/accessories specified by the 
manufacturer.

12

Use only with the cart, stand, 
tripod, bracket, or table specified 
by the manufacturer, or sold with 
the apparatus. When a cart is 
used, use caution when moving 
the cart/apparatus combination 
to avoid injury from tip-over.

13

Unplug this apparatus during 
lightning storms or when unused for long periods of 
time.

14

Refer all servicing to qualified service personnel. 
Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or plug 
is damaged, liquid has been spilled or objects have 
fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, 
or has been dropped.

 

(98-6500)

CAUTION: TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT REMOVE 

COVER (OR BACK). NO USER-SERVICEABLE 

PARTS INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

 

WARNING

 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

 

1.  IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

 

This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC requirements. Modifications 
not expressly approved by Yamaha may void your authority, 
granted by the FCC, to use the product.

 

2. IMPORTANT:

 

 When connecting this product to accessories 

and/or another product use only high quality shielded cables. 
Cable/s supplied with this product MUST be used. Follow all 
installation instructions. Failure to follow instructions could void 
your FCC authorization to use this product in the USA.

 

3. NOTE:

 

 This product has been tested and found to comply with 

the requirements listed in FCC Regulations, Part 15 for Class 
“B” digital devices. Compliance with these requirements pro-
vides a reasonable level of assurance that your use of this prod-
uct in a residential environment will not result in harmful 
interference with other electronic devices. This equipment gen-
erates/uses radio frequencies and, if not installed and used 
according to the instructions found in the users manual, may 
cause interference harmful to the operation of other electronic 

devices. Compliance with FCC regulations does not guarantee 
that interference will not occur in all installations. If this product 
is found to be the source of interference, which can be deter-
mined by turning the unit “OFF” and “ON”, please try to eliminate 
the problem by using one of the following measures:
Relocate either this product or the device that is being affected 
by the interference. 
Utilize power outlets that are on different branch (circuit breaker 
or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the 
antenna. If the antenna lead-in is 300 ohm ribbon lead, change 
the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results, 
please contact the local retailer authorized to distribute this type 
of product. If you can not locate the appropriate retailer, please 
contact Yamaha Corporation of America, Electronic Service Divi-
sion, 6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed 
by Yamaha Corporation of America or its subsidiaries.

 

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

(class B)

 

FCC INFORMATION (U.S.A.)

Содержание T4n





















Отзывы: