Yamaha T115FL-2P, Руководство пользователя

Страница: 63 / 80

Perio d ic maintenance an d a d justment
7-28
7
EAU23855
Replacin g the hea d li g ht b ul b
This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
ECA10651
Take care not to d ama g e the follow-
in g parts:
z
Hea d li g ht b ul b
Do not touch the g lass part of
the hea d li g ht b ul b to keep it free
from oil, otherwise the transpar-
ency of the
g lass, the luminosity
of the b ul b , an d the b ul b life will
b e a d versely affecte d . Thor-
ou g hly clean off any d irt an d fin-
g erprints on the hea d li g ht b ul b
usin g a cloth moistene d with al-
cohol or thinner.
z
Hea d li g ht lens
Do not affix any type of tinte d
film or stickers to the hea d li g ht
lens.
Do not use a hea
d li g ht b ul b of a
watta g e hi g her than specifie d .
1. Remove cowling B together with
the headlight unit. (See page 7-7.)
2. Disconnect the headlight coupler,
and then remove the bulb cover.
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the cowling together with
the headlight unit.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
1. Do not touch the glass part of the bulb.
1. Headlight coupler
2. Rubber cover
3. Head light bulb
1 2 3
UB6FE0E0.book Page 28 Friday, August 11, 2017 3:37 PM