Yamaha SY.22, Уполномоченное руководство по продукции, Страница: 73 / 101

UTILITY SETUP
Exercise caution when saving data to a memory
card — the previous card data will be erased and
completely replaced by the saved data.
Refer to: Tutorial, page 12.
•Load
Summary: Formats MCD64 or MCD32 Memory
Cards so that they can be used by the SY22 to
save and load voice and multi-play data.
Settings: FORMAT
Summary: Loads voice and multi-play data from a
memory card into the SY22 internal memory.
Settings: LOAD
Procedure: Use the [ ] key to move the cursor to
the lower display line, then use the [-1/NO] and
[+1/YES] keys to select "FORMAT." Now
Details: Formatting can only be carried out if the
memory card WRITE PROTECT switch is
turned OFF (refer to your MCD64 or MCD32
Memory Card instructions for details).
Refer to: Tutorial, page 12.
•Bank
Summary: Selects bank 1 or bank 2 of a Yamaha
MCD64 type memory card prior to formatting or
load/save operations.
Settings: 1,2
Procedure: Use the [ ] key to move the cursor to
the lower display line, then use the [-1/NO] and
[+1/YES] keys to select "BANK." Now press
display will appear. Press the [+1/YES] key to
start the load operation, or the [-1/NO] key to
cancel. "****LOAD NOW****" will appear on
the display while the operation is in progress,
and "»Completed!!«" will appear briefly
when the load operation has finished.
Details: The LOAD operation can only be executed
if the INTERNAL parameter of the MEMORY
PROTECT function described on page 73 is
turned "off."
When an MCD64 Memory Card is used, the
bank from which the data is to be loaded can be
selected using the BANK function described on
page 70.
Exercise caution when loading data from a
memory card — the corresponding internal SY22
data will be erased and completely replaced by
the loaded data.
Refer to: Tutorial, page 12.
70
•Format
Details: MCD32 memory cards only have a single
bank, so bank 2 cannot be selected if this type of
card is used. MCD64 memory cards allow
selection of bank 1 or 2. Each bank holds 64
voices and 16 multi-play setups.
Refer to: Tutorial, page 12.
Procedure: Use the [ ] key to move the cursor to
press the [ ] key again and the "FORMAT ?"
display will appear. Press the [+1/YES] key to
start the format operation, or the [-1/NO] key to
cancel. "»Completed!!«" will appear briefly
when the format operation has finished.
t h e ] key again to move the cursor to the bank
number. Use the [-1/NO] and [+1/YES] keys to
select the desired bank.
the [ ] key again and the "LOAD from CARD?"
the lower display line, then use the [-1/NO] and
[+l/YES] keys to select "LOAD." Now press