Yamaha SWR2100P-10G, Руководство пользователя

Страница: 6 / 28

PRECAUTIONS
6
SWR2100P-10G/SWR2100P-5G Owner’s Manual
CAUTION
Always follow the basic precautions
listed below to avoid the possibility of
physical injury to you or others, or
damage to the device or other property.
These precautions include, but are not
limited to, the following:
Power supply/power cord
• When removing the electric plug from the
device or an outlet, always hold the plug
itself and not the cord. Pulling by the cord
can damage it.
Location
• Do not place the device in an unstable
position where it might accidentally fall
over and cause injuries.
• Do not block the vents. This device has
ventilation holes at the top to prevent the
internal temperature from becoming too
high. In particular, do not place the
device on its side or upside down.
Inadequate ventilation can result in
overheating, possibly causing damage to
the device(s), or even fire.
• When installing the device:
- Do not cover it with any cloth.
- Do not install it on a carpet or rug.
- Make sure the top surface faces up; do
not install on its sides or upside down.
- Do not use the device in a confined,
poorly-ventilated location.
Inadequate ventilation can result in
overheating, possibly causing damage to
the device(s), or even fire. If this device is
to be used in a small space other than an
EIA-standard rack, make sure that there is
adequate space around the device: at
least 1.3 cm above.
• Do not place the device in a location
where it may come into contact with
corrosive gases or salt air. Doing so may
result in malfunction.
• Before moving the device, remove all
connected cables.
• If the device is mounted in an EIA
standard rack, carefully read the section
“Attaching the rack mount” on page 17.
Inadequate ventilation can result in
overheating, possibly causing damage to
the device(s), malfunction, or even fire.
Maintenance
• Remove the power plug from the AC
outlet when cleaning the device.
Handling caution
• Avoid inserting or dropping foreign
objects (paper, plastic, metal, etc.) into
any gaps or openings on the device
(vents, panel, etc.) If this happens, have
the device inspected by qualified Yamaha
service personnel.
• Do not rest your weight on the device or
place heavy objects on it. Avoid applying
excessive force to the buttons, switches
or connectors to prevent injuries.
• Avoid pulling the connected cables to
prevent injuries or damage to the device.
Yamaha cannot be held responsible for
damage caused by improper use or
modifications to the device.