Yamaha SW-3, Руководство пользователя

Страница: 6 / 14

6
• Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
• When making connections between this unit and other components, be sure all connections are made correctly and consistently,
that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”.
• This unit can be connected to either the speaker terminals or the line output (pin jack) terminals of the amplifier. Choose one of
the ways shown below which is suitable for your audio system. Also, refer to the owner’s manual for each component to be
connected to this unit.
CONNECTING TO SPEAKER TERMINALS OF THE AMPLIFIER
Disconnect your main speakers from the amplifier and connect them to this unit.
To connect one unit only
To connect two units
CONNECTIONS
INPUT1 INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
ON OFF
AUTO
POWER
HIGH CUT
STANDBY-RED
ON-GREEN
VOLUME
150 Hz 0 10 50 Hz
POWER
OFF
ON
INPUT1 INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT1 INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
ON OFF
AUTO
POWER
HIGH CUT
STANDBY-RED
ON-GREEN
VOLUME
150 Hz 0 10 50 Hz
POWER
OFF
ON
INPUT1 INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
ON OFF
AUTO
POWER
HIGH CUT
STANDBY-RED
ON-GREEN
VOLUME
150 Hz 0 10 50 Hz
POWER
OFF
ON
INPUT1 INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT1 INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
This unit
Left speaker Right speaker
Left speaker Right speaker
Amplifier
Amplifier
To AC outlet To AC outlet
To AC outlet
This unit This unit