Yamaha SUV1200 WaveRunner 2003 Скачать руководство пользователя | Manualshive

Страница: 13 / 140

background image

1-8

E

EJU01177

Safety information

The safe use and operation of this

watercraft is dependent upon the use of
proper riding techniques, as well as upon
the common sense, good judgment, and
expertise of the operator. Every operator
should know the following requirements
before riding the watercraft.

●

Before operating the watercraft, read the
Owner’s/Operator’s Manual, the Riding
Practice Guide, the Riding Instruction
card and all warning and caution labels
on the watercraft. Also, watch the Basic
Orientation Video provided with your
watercraft. These materials should give
you an understanding of the watercraft
and its operation.

●

Never allow anyone to operate this water-
craft until they too have read the Owner’s/
Operator’s Manual, the Riding Practice
Guide, the Riding Instruction card and all
warning and caution labels, and if possi-
ble watched the Basic Orientation Video.
Showing them the video may help rein-
force the information contained in these
materials.

EJU01159

Limitations on who may
operate the watercraft

●

Yamaha recommends a minimum opera-
tor age of 16 years old.
Adults must supervise use by minors.
Know the operator age and training
requirements for your state. A boating
safety course is recommended and may
be required in your state. You can find
local rules by contacting the United
States Coast Guard (USCG), the National
Association of State Boating Law Admin-
istrators, or your local Power Squadron.

●

This watercraft is designed to carry the
operator and up to 3 passengers. Never
exceed the maximum load limit or allow
more than 4 persons (or 3 persons if a
water-skier is being pulled) to ride the
watercraft at one time.

●

Do not operate the watercraft with any
passengers on board until you have con-
siderable practice and experience riding
alone. Operating the watercraft with pas-
sengers requires more skill. Take the time
to become accustomed to the handling
characteristics of the watercraft before
trying any difficult maneuvers.

Maximum load: 300 kg (662 lb)

Load is the total weight of cargo, opera-
tor and passengers.

UGU512.book Page 8 Friday, May 31, 2002 4:01 PM

«
...
11
12
13
14
15
...
»

Содержание SUV1200 WaveRunner 2003













































































































































Отзывы:

Нет отзывов

Похожие инструкции для SUV1200 WaveRunner 2003

Бренд: Hobie Страницы: 40

Бренд: Gardasolar Страницы: 69

Бренд: Sea Eagle Страницы: 13

Бренд: Chinook Страницы: 20

Бренд: Thaijetboard Страницы: 32

Бренд: Blue Wave Boats Страницы: 1

Бренд: Axiom Страницы: 28

Hewes Redfisher 16

Бренд: Maverick Boat Страницы: 23

190 Montauk 2018

Бренд: Boston Whaler Страницы: 88

170 Super Sport 2018

Бренд: Boston Whaler Страницы: 90

Бренд: Sea-doo Страницы: 132

Бренд: Boston Whaler Страницы: 106

Ocean Runner 300

Бренд: Mercury Страницы: 40

Quicksilver 200 Tendy Slatted

Бренд: Mercury Страницы: 63

Бренд: World Cat Страницы: 109

Бренд: Walker Bay Страницы: 18

WaveRunner XL800

Бренд: Yamaha Страницы: 126

Бренд: Jeanneau Страницы: 114

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды