Yamaha SUPERJET 700 2005 Скачать руководство пользователя | Manualshive

Страница: 17 / 114

background image

1-10

E

●

Helmets meeting Snell or DOT standards
are required for IJSBA-sanctioned races.
You must decide whether to wear a hel-
met while you ride for recreation. You
should know that a helmet could help pro-
tect you in certain kinds of accidents and
that it could injure you in others.
A helmet is designed to provide some
head protection. Although helmets cannot
protect against all foreseeable impacts, a
helmet might reduce your injuries in a col-
lision with a boat or other obstacle.
A helmet may have potential safety haz-
ards, as well. Falling into the water could
risk the chance of the helmet catching
water, commonly known as “bucketing,”
and the resulting strain on your neck
could cause choking, severe and perma-
nent neck injuries, or death. A helmet
could also increase the risk of an accident
if it reduces your vision or hearing, or if it
distracts you or increases your fatigue.
How should you decide if a helmet’s
potential safety benefits outweigh its
potential risks for you? Consider your par-
ticular riding conditions. Consider factors
such as your riding environment and your
riding style and ability. Also consider the
likelihood of traffic congestion, and the
water surface conditions. If you decide to
wear a helmet based upon your riding cir-
cumstances, choose one carefully. Look
for a helmet designed for personal water-
craft use, if possible. Consider a helmet
meeting Snell or DOT standards. If you
will be engaging in closed-course compe-
tition, follow the helmet requirements of
the sanctioning organization.

●

NEVER operate the watercraft after con-
suming alcohol or taking other drugs.

●

For reasons of safety and proper care of
the watercraft, always perform the pre-
operation checks listed on page 3-5
before operating the watercraft.

●

The operator should always keep both
feet or knees on the riding tray when the
watercraft is in motion. Lifting your feet
increases your chances of losing your
balance, and your feet being hit by objects
outside the watercraft.

●

Always consult your doctor on whether it
is safe for you to operate this watercraft if
you are pregnant or in poor health.

●

Do not attempt to modify this watercraft!
Modifications to your watercraft may
reduce safety and reliability, and render
the watercraft unsafe or illegal for use.

UF1N13.book Page 10 Monday, May 31, 2004 9:02 AM

«
...
15
16
17
18
19
...
»

Содержание SUPERJET 700 2005



















































































































Отзывы:

Нет отзывов

Похожие инструкции для SUPERJET 700 2005

Sport Boat Models

Бренд: LARSON Страницы: 102

Бренд: Sea Eagle Страницы: 8

HYDRO-FORCE 65047

Бренд: Bestway Страницы: 32

Fairline Phantom Flybridge Cruisers 46 -...

Бренд: FAIRLINE Страницы: 24

Бренд: Cobalt Digital Inc Страницы: 132

Бренд: Sea-doo Страницы: 116

SAR 2018 Series

Бренд: Sea-doo Страницы: 164

Бренд: Malibu Boats Страницы: 206

Бренд: Nortik Страницы: 34

Adventure 250/270

Бренд: Mercury Страницы: 46

Бренд: Polaris Страницы: 331

Бренд: BENETEAU Страницы: 35

Бренд: Malibukayaks Страницы: 23

Бренд: Patriot Страницы: 14

Бренд: YAMARIN Страницы: 21

Бренд: Malibu Boats Страницы: 170

Бренд: Four winns Страницы: 128

Бренд: Robalo Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды