Yamaha SUPER TENERE XT1200Z, Руководство пользователя

Страница: 52 / 116

INSTRUMENT AND CONTROL FUNCTIONS
3-37
3
TIP
Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the above
specifications due to small differences
in production, the actual number of
clicks always represents the entire ad-
justing range. To obtain a precise ad-
justment, it would be advisable to
check the number of clicks of each
damping force adjusting mechanism
and to modify the specifications as
necessary.
EAU49692
A d justin g the shock a b sor b er
assem b ly
This shock absorber assembly is
equipped with a spring preload adjust-
ing knob and a rebound damping force
adjusting knob.
NOTICE
ECA10102
To avoi d d ama g in g the mechanism,
d o not attempt to turn b eyon d the
maximum or minimum settin g s.
Sprin g preloa d
To increase the spring preload and
thereby harden the suspension, turn
the adjusting knob in direction (a). To
decrease the spring preload and there-
by soften the suspension, turn the ad-
justing knob in direction (b).
NOTICE:
To avoi d d ama g in g the a d justin g
kno b , d o not turn the a d justin g kno b
while sittin g on the vehicle.
[ECA20110]
TIP

Align the appropriate mark on the
adjusting mechanism with the
matching edge.
1. Compression damping force adjusting
screw
Compression d ampin g settin g :
Minimum (soft):
13 click(s) in direction (b)*
Standard:
6 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully
turned in direction (a)
1
(a)
(b)
U2BSE0E0.book Page 37 Tuesday, September 17, 2013 8:55 AM