Yamaha Super Tenere ES 2022, Руководство пользователя

Страница: 43 / 132

Instrument an d control functions
4-26
4

This ABS has a test mode which
allows the owner to experience
the pulsation at the brake lever or
brake pedal when the ABS is op-
erating. However, special tools are
required, so please consult your
Yamaha dealer.
NOTICE
ECA16831
Keep any type of ma g nets (inclu d in g
ma g netic pick-up tools, ma g netic
screw d rivers, etc.) away from the
front an d rear wheel hu b s; other-
wise, the ma g netic rotors equippe d
in the wheel hu b s may b e d ama g e d ,
resultin g in improper performance
of the ABS an d the unifie d b rake
system.
EAU58943
Traction control system
The traction control system helps
maintain traction when accelerating on
slippery surfaces, such as unpaved or
wet roads. If sensors detect that the
rear wheel is starting to slip (uncon-
trolled spinning), the traction control
system assists by regulating engine
power as needed until traction is re-
stored. The traction control system in-
dicator light flashes to let the rider
know that traction control has en-
gaged.
TIP
The rider may also notice slight chang-
es in engine and exhaust sounds when
the traction control system is engaged.
WARNING
EWA15433
The traction control system is not a
su
b stitute for ri d in g appropriately
for the con d itions. Traction control
cannot prevent loss of traction d ue
to excessive spee d when enterin g
turns, when acceleratin g har d at a
sharp lean an g le, or while b rakin g ,
an d cannot prevent front wheel slip-
pin g . As with any vehicle, approach
surfaces that may b e slippery with
caution an d avoi d especially slip-
pery surfaces.
There are three traction control system
modes:

“TCS 1”: Default mode

“TCS 2”: Sporty mode
This mode decreases traction
control system assist, allowing the
rear wheel to spin more freely than
“TCS 1”.
1. Front wheel hub
1. Rear wheel hub
1
1
UBP914E0.book Page 26 Wednesday, October 6, 2021 4:52 PM