manualshive.com logo in svg

Yamaha STAR XVS950, Руководство пользователя

Поделиться
Скачать
Yamaha STAR XVS950 Скачать руководство пользователя страница 65

 

PERIODIC MAINTENANCE AND ADJUSTMENT

 

6-27

 

2

3

4

5

6

7

8

9

 

4. If the fuse immediately blows

again, have a Yamaha dealer
check the electrical system.

 

EAU23795

 

Replacing the headlight bulb 

 

This model is equipped with a quartz
bulb headlight. If the headlight bulb
burns out, replace it as follows.

NOTICE

 

 ECA10650

 

Take care not to damage the follow-
ing parts:

 

●

 

Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.

 

●

 

Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a

 

wattage higher than specified.

 

1. Remove the headlight unit by re-

moving the screws.

2. Disconnect the headlight coupler,

and then remove the bulb cover.

 

1. Do not touch the glass part of the bulb.

1. Screw

1

Содержание STAR XVS950





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды