INSTRUMENT AND CONTROL FUNCTIONS
4-7
4
TIP
After refueling, the fuel gauge does not
indicate the correct fuel level unless
the vehicle speed has exceeded 5
km/h (3 mi/h).
O
d
ometer, tripmeters, fuel reserve
tripmeter an
d
clock
Push the “SELECT” switch to switch
the display between the odometer
mode “ODO”, the tripmeter modes
“TRIP 1” and “TRIP 2” and the clock
mode in the following order:
ODO
→
TRIP 1
→
TRIP 2
→
Clock
→
ODO
If the fuel level warning light comes on
(see page 4-4), the odometer display
will automatically change to the fuel re-
serve tripmeter mode “F-TRIP” and
start counting the distance traveled
from that point. In that case, push the
“SELECT” switch to switch the display
between the various tripmeter, odome-
ter, and clock modes in the following
order:
F-TRIP
→
TRIP 1
→
TRIP 2
→
Clock
→
ODO
→
F-TRIP
To reset a tripmeter, select it by push-
ing the “SELECT” switch, and then
push the reset switch for at least one
second. If you do not reset the fuel re-
serve tripmeter manually, it will reset it-
self automatically, and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).
To set the clock
1. Push the “SELECT” switch to
change the display to the clock
mode.
2. Push the “SELECT” and reset
switches together for at least two
seconds.
3. When the hour digits start flash-
ing, push the reset switch to set
the hours.
4. Push the “SELECT” switch, and
the minute digits will start flashing.
5. Push the reset switch to set the
minutes.
6. Push the “SELECT” switch and
then release it to start the clock.
1. Odometer/tripmeter/fuel reserve tripme-
ter/clock
1. Clock
U5C528E0.book Page 7 Wednesday, July 10, 2013 9:43 AM
