Yamaha SRX700G Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 84

Yamaha SRX700G Скачать руководство пользователя страница 30

6-2

●

Make sure that the fuel tank cap is closed securely
after refueling. Leaking fuel can catch fire.

@

2

Fuel level

CAUTION:

@

●

Oxygenated fuels (gasohol) containing a maxi-
mum 5% of ethanol can be used, although richer
jetting may be required to prevent engine dam-
age. Consult a Yamaha dealer. Gasohol contain-
ing methanol is not recommended.

●

Make sure that snow or ice does not enter the fuel
tank when refueling.

●

Do not use alcohol deicers or water absorbing
additives with oxygenated fuel.

●

The fuel tank should be filled with straight gaso-
line as specified.

@

ESU00083

Engine oil

Make sure that there is sufficient oil in the oil tank.

ESU00086

Coolant

Check the coolant level in the coolant reservoir when the
engine is cold. If the coolant level is below the
“COLD LEVEL” mark, add soft water until it reaches the
“COLD LEVEL” mark. (See pages 8-11–8-12 for more
details.)

1

“COLD LEVEL” mark

WARNING

@

Do not remove the coolant reservoir cap when the
engine is hot.

@

CAUTION:

@

●

Hard water or salt water is harmful to the engine
parts. You may use boiled or distilled water, if soft
water is not available.

●

Tap water can be used temporarily in an emer-
gency.

@

Oil tank capacity: 3.3 L (2.9 Imp qt, 3.5 US qt)
Recommended oil: YAMALUBE 2-cycle oil

U8DF14.book Page 2 Friday, July 27, 2001 5:01 PM

«
...
28
29
30
31
32
...
»

Содержание SRX700G





















































































Отзывы:

Нет отзывов