Yamaha SPM-K1 - Mounting Kit For Speaker, Руководство по установке

Страница: 6 / 52

INSTALLATION PROCEDURE
E-4
Use four of the projector mounting screws (M6 x 16) provided to securely attach the small wall mount brackets (2) to the
rear left and right sides of the Sound Projector.
Fit the mounting guide hooks of the small wall mount brackets attached to the Sound Projector into the holes on the left
and right sides of the large wall mount bracket, then slide the unit to the right.
Hold the projector tight with the both hands when attaching / removing the projector to / from the wall.
Holding the projector loose could cause the projector to fall, resulting in personal injury.
Attach the small wall mount brackets to the Sound Projector.
Mount the projector on the wall.
1
1
2
2
Slide the unit to the
right.
Fit the hook into the
hole.
Rear View
Projector mounting
screws (M6 x 16)
Safety wire (Attached
by the method A)
Attach the brackets to the
rear left and right sides of
the Sound Projector.
Safety wire (Attached
by the method B)
01EN_SPM-K1_U.book Page 4 Friday, March 25, 2005 1:51 PM