Yamaha SP2060 Скачать руководство пользователя страница 46

Страница: 46 / 57

Ref

erences

Intr

oduction

to the SP2060

Fore

The Contr

ols

and Connector

Netw

ork Settings

anel Operation

References

SP2060 Owner’s Manual

Status messages

* Do NOT turn off the power to the SP2060 while the unit displays the message “DO NOT TURN OFF!” at the bottom of the display.

Troubleshooting

Message

Meaning

Connecting

Connecting to the network.

Download Success

The program has been successfully updated.

Downloading

Program update in progress. Do NOT turn power off while the unit displays this message.

File Operating

A file operation is in progress during which the computer manipulates scene data. Do NOT turn power off
while the unit displays this message.

Network Setup

Preparing network connection.

Panel Locked

The User Lock function is engaged. The panel controls do not work.

Panel Unlocked

The User Lock function has been disengaged. Panel operation is now possible.

Scene Recalling

Scene recall in progress.

Scene Storing

Scene store in progress. Do NOT turn power off while the unit displays this message.

Cannot Recall

Recalling scenes or libraries is disabled.

Cannot Store

The scene store is disabled.

NO X-OVER

Input channels do not feature the X-Over parameter.

NO LIMITER

Input channels do not feature the Limiter parameter.

Protected

You cannot edit or delete protected scenes.

Panel Protected

If the User Lock function is turned on, you cannot change the parameters by using the panel controls.

NO ROUTING

Input channel SUM does not feature the Routing parameter.

NO LEVEL

Input channel SUM does not feature the Level parameter.

Network Busy

There is too much network traffic. Communication is very slow.

Synchronizing

Data is being received from the computer. Do NOT turn power off while the unit displays this message.

Scene Deleting

Deleting a scene. Do NOT turn power off while the unit displays this message.

Symptom

Possible Causes

Possible Solutions

No communication between the
SP2060 and the DME Designer
application software.

The connection cable is not connected properly.

Make sure that the cable is properly connected.

The computer's Ethernet port is not functioning
properly.

Refer to the DME Designer Installation Guide.

The DME-N Network driver has not been
installed.

Install and set up the DME-N Network driver.

No audio output.

The Mute function is turned on.

Turn off the Mute function (see page 36).

The output level is set too low.

Increase the output level (see page 23).

The parameters cannot be edited.

The User Lock function is turned on.

Turn off the User Lock function (see page 33).

Содержание SP2060


























































Результаты поиска

Содержание SP2060

Отзывы:

Похожие инструкции для SP2060

Бренды по названию

Популярные бренды

Yamaha SP2060, Руководство пользователя

Результаты поиска

Содержание SP2060

Отзывы:

Похожие инструкции для SP2060

Бренды по названию

Популярные бренды