Yamaha SLIDER EW50 NAKED Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 80

Yamaha SLIDER EW50 NAKED Скачать руководство пользователя страница 48

PERIODIC MAINTENANCE AND MINOR REPAIR

6

EAU03773

Cast wheels

To  maximize  the  performance,
durability,  and  safe  operation  of  your
scooter,  note  the  following  points
regarding the specified wheels.

•

The  wheel  rims  should  be
checked  for  cracks,  bends  or
warpage before each ride. If any
damage is found, have a Yamaha
dealer replace the wheel. Do not
attempt even the smallest repair
to  the  wheel.  A  deformed  or
cracked wheel must be replaced.

•

The  wheel  should  be  balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced  wheel  can  result  in
poor  performance,  adverse
handling  characteristics,  and  a
shortened tire life.

•

Ride at moderate speeds after
changing a tire since the tire sur-
face must first be "broken in" for it
to

develop

its

optimal

characteristics.

EAU00697*

Adjusting the front brake
lever free play

The brake lever free play should
measure 10 - 20 mm as shown.
Periodically check the brake lever free
play and, if necessary, have a Yamaha
dealer adjust it.

EW000100

An  incorrect  brake  lever  free  play
indicates  a  hazardous  condition  in
the brake system. Do not operate the
scooter until the brake system has
been  checked  or  repaired  by  a
Yamaha dealer.

a

ZAUM0107

a

ZAUM0108

a. Front brake lever free play

a. Rear brake lever free play

EAU04469

Adjusting the rear brake
lever free play

The  brake  lever  free  play  should
measure  10  -  20  mm  as  shown.
Periodically check the brake lever free
play  and,  if  necessary,  adjust  it  as
follows.

6-11

«
...
46
47
48
49
50
...
»

Содержание SLIDER EW50 NAKED

















































































Отзывы:

Нет отзывов