2. Adjustment / Confirmation Items
・
R
emove the
switch box
・
Disconnect three cables
・
Check / adjustment
・
Check / adjustment of hammer shank stopper
・
Hammer shank stopping position adjustment
4.5 – 7 mm (Normally only checking)
・
Checking pedal stroke
・
Checking and adjustment of the shank stopper
height and width position
・
Escapes at the shank stopping position :1 to 2mm
before shank stopping position.
・
Key sensor unit adjustment
Gap between the bottom surface of black keys and the
upper surface of key sensor unit when pressing the black
keys to the lowest position : 3.8 to 4.0mm
・
Adjustment of pedal sensor unit
・
Program to adjust the detection position of the key sensor
and damper pedal sensor by measurement.
・
Executes measurement after the key sensor adjustment.
・
Program to check the detection position of the
key sensor and damper pedal sensor.
・
Measurement result and adjustment status can be confirmed.
⇒
P.7
⇒
P.7
⇒
P.7
⇒
P.7
Silent mechanism
⇒
P.10-11
⇒
P.11
⇒
P.8
⇒
P.9-10
⇒
P.7
⇒
P.8
Adjustment item
Ref. page
⇒
P.6
Lower Front Board removal
caution
Test mode
Maintenance mode
Sensor unit adjustment
Silent let-off adjustment
Description
⇒
P.6
5
