manualshive.com logo in svg

Yamaha Silent Brass ST5, Руководство пользователя

Поделиться
Скачать
Yamaha Silent Brass ST5 Скачать руководство пользователя страница 33

33

If the unit does not operate properly, please check the
following points first. If that does not resolve the prob-
lem, contact your Yamaha dealer.

■

 The power does not turn on.

• Are batteries installed?
• Is the AC adaptor properly connected to an AC outlet

or the unit?

■

 No sound.

• Are the pickup mute/pickup mic, amp or headphones

connected properly?

• Is the amplifier turned on?
• Are any of the cables broken?
• Is the Master Level set to “0” or to a low level?
• Is the effect block level set to “0” or to a low level?
• Is the mute active (the effect block blinks rapidly)?

Be aware that if all effect blocks are turned OFF, the
effect blocks will not be displayed.

■

 The volume from the device connected to

the AUX IN jack is too loud or too soft or
cannot be heard.

• Adjust the output level of the connected device. The

device should be connected via its headphone jack,
not the line out jack.

• Is the Phrase Trainer mode active?
• Is the cable you are using equipped with a built-in re-

sistor?

■

 Effects are not applied.

• Is the effect bypass active (all effect blocks will be

blinking)?

• Are the effects used in the program turned ON? De-

pending upon the mode, certain effects (MOD, D/R)
may not be available.

■

 The effect sound does not stop, or the

sound suddenly gets louder.

• Are you using OVDRV (Overdrive) or DIST (Distor-

tion) effects with a sound system and playing too close
to the speaker?

• Lower the Master Level, or press the Bypass switch.

Troubleshooting

Содержание Silent Brass ST5





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды