SLB300 Owner’s Manual
14
Attaching the Frame Unit
The SILENT Bass
TM
is shipped from the factory with the frame unit removed from the
main body.
Before using this product, please properly attach the frame unit to the main body using
the following procedure.
Installation Procedure
1.
Open the upper arm support on the frame unit, until it comes in contact with the stopper.
2.
With the frame unit's arm section (fixing screw 2) still closed (raised), gently slide the indenta-
tion of the frame unit's upper part in the direction of “
2
Slide” in the figure below.
3.
Tighten fixing screw 1.
4.
Rotate the arm section counter-clockwise to open it up, and insert fixing screw 2 into the holder
on the bass instrument.
5.
Tighten fixing screw 2 to secure the frame unit to the bass instrument.
Frame attachment is complete.
To remove the frame unit, simply reverse the procedure described above.
• Securely tighten fixing knobs 1 and 2. Using the instrument with the attachments loose can result in
parts rattling or making noise during performance.
• When transporting the instrument, always hold it by its neck or main body. Holding by the frame unit only
may result in damage to the frame unit.
When moving movable parts, be careful not to pinch your fingers, hands, or the
like.
Fixing knob 2
1
Open
Tighten
5
Arm section
2
Slide onto body
3
Tighten
Open
4
Upper Arm Support
Fixing knob 1
Receiver
Fixing knob 2
NOTICE
