FIT RUBBER SEAL BEFORE
FIRST USE THE SEAL AND EXPLORER!
STEP 2
STEP 1
Fig.2a
Fig.2b
STEP 2
Fig.2b
9
10
1. Unlock two latches and remove Nose Cone.
2. Rubber seal must be fitted as shown and fully
lubricated with the supplied grease EVERYTIME before
replacing the nose cone.
SEAL
CRUSHING HAZARD:
The following action during assembly, disassembly, and
transportation of the seascooter may incur crushing hazards
to your fingers or toes:
-Closing the nose cone latches
-Putting on the nose cone housing
-Placing the battery into the seascooter
-Accidental dropping of the seascooter or battery.
Silicone
Grease
Sealing
Surface
O-ring Seal
