Yamaha SCORPIO 54D Скачать руководство пользователя

Страница: 79 / 86

MOTORCYCLE CARE AND STORAGE

7-4

U5YPE0E0.book Page 4 Wednesday, February 23, 2005 4:22 PM

WARNING

To prevent da-

[EWA10951]

mage or injury from spar-

king, make sure to ground

the spark plug electrodes

while turning the engine over.

6. Lubricate all control cables and the

pivoting points of all levers and

pedals as well as of the side-

stand/centerstand.

7. Check and, if necessary, correct

the tire air pressure, and then lift

the motorcycle so that both of its

wheels are off the ground. Alterna-

tively, turn the wheels a little every

month in order to prevent the tires

from becoming degraded in one

spot.

8. Cover the muffler outlet with a

plastic bag to prevent moisture

from entering it.

9. Remove the battery and fully

charge it. Store it in a cool, dry

place and charge it once a month.

Do not store the battery in an ex-

cessively cold or warm place [less

than 0 °C (30 °F) or more than 30
°C (90 °F)]. For more information

on storing the battery, see page

6-28.

TIP :

Make any necessary repairs before

storing the motorcycle.

d. Turn the engine over several

times with the starter. (This will

coat the cylinder wall with oil.)

e. Remove the spark plug cap

from the spark plug, and then

install the spark plug and the

spark plug cap.

Содержание SCORPIO 54D























































































Результаты поиска

Содержание SCORPIO 54D

Отзывы:

Похожие инструкции для SCORPIO 54D

Бренды по названию

Популярные бренды

Yamaha SCORPIO 54D, Руководство пользователя

Результаты поиска

Содержание SCORPIO 54D

Отзывы:

Похожие инструкции для SCORPIO 54D

Бренды по названию

Популярные бренды