You have a total of 4 zones that can be
called up for editing.
After you have set
the Zone Switch to on, press the EDIT
button, then press Buttons 1, 2, 3 or
4 (ELEMENT/PERF PART/ZONE) on
the right hand side of the keyboard to
bring up the zone edit screen.
The first screen that comes up
is the TRANS (transmit) screen
that allows you to set what
channel the S90 is transmitting
on, whether or not the S90
internal tone generator is active
and whether or not the MIDI
output is engaged on a per-
zone basis. In the screen to the
right both the tone generator is
sounding and MIDI data is being
transmitted out the MIDI out on
channel 1, Zone 1. Zones 2, 3
and 4 are currently inactive, but
it is easy to see that by using
the cursor to navigate to the
various zone areas I could
easily change engage the other
zones, change the transmit
channels and route information
to either the Tone Generator or
the MIDI output.
ZONE 1-4
MIDI Transmit Channel
Tone Generator ON/OFF
MIDI OUT ON/OFF
Navigating through the various
screens is done via the function
keys located directly beneath
the screen. F1, F2, F3, F4 and
F5 are active in the Zone edit
screen.
F2 Selects the NOTE display. On a per-zone basis you can set
the octave (+/- 3 octaves), the transposition (+/- 12
semitones) and the note limit for splits and layers.
F3 Selects the TX SW or Transmit Switch display. On a per-
zone basis you can select whether or not Bank Select Messages
and Program Changes are transmitted either to the S90
Internal Tone generator or via the MIDI output
F4 Selects the PRESET display. On a per-zone basis you can
set the bank select controllers 0 and 32 (Bank MSB and LSB),
the program change number, volume (controller #7) and Pan
position (controller #10) settings
F5 Selects the CS or Control Slider display. On a per-zone
basis you can set the controller transmitted by each of the 4 CS
sliders when they are in their zone control function setting (last
row down on the Control Slider area on the right of the
keyboard front panel)
