Yamaha S03 voice editor, Руководство пользователя

Страница: 56 / 112

56
Multi Mode
Common
(Settings for all Parts)
Here we explain how to edit common settings for all
Parts in a Multi. There are two types available, each of
which consists of multiple pages.
n
Refer to the Function Tree chart (page 20) or the
Parameter Table (page 22).
Common General (PAGES 1 to 3)
Common Effect (PAGES 4 to 21)
1. Name
You can set a Multi Name consisting of up to 8
characters. You can also select the Category Name to
the left of the Multi Name.
n
The method of setting the Multi Name is the same as for
the Voice Name. Details are given on page 71.
2. Total Vol (Total Volume)
Set the overall volume of the Multi.
❏
Settings: 0~127
3. Transpose
This determines the overall Transpose setting of the
Parts, in semitone units. It does not affect information
transmitted via MIDI.
❏
Settings : –24 (–2 octaves) ~ +24 (+2 octaves)
n
This parameter has no effect for Parts set to the Drum
mode (page 61).
4. RevEF (Reverb Effect Type)
Select the Reverb Effect Type here, then set the effect’s
parameters in the following PAGES.
❏
Settings: Details are given in the Effect Type list in the
separate Data List.
5. Reverb Parameters
Set the various Reverb effect parameters.
❏
Settings : The number of parameters and the contents of each
screen will vary depending on the selected Effect
Type. Details are given in the Effect Type/
Parameter list in the separate Data List.
6. Rev Return (Reverb Return)
Set the Return level of the Reverb Effect.
❏
Settings : 0 ~ 127
Init Mlt
Name
KEY ELEM PART
OCTAVE
PAGE
1
Total Vol
127
KEY ELEM PART
OCTAVE
PAGE
2
Transpose
+00
KEY ELEM PART
OCTAVE
PAGE
3
Hall 1
RevEF
KEY ELEM PART
OCTAVE
PAGE
4
Rev Time
2.1
KEY ELEM PART
OCTAVE
PAGE
5
Rev Return
064
KEY ELEM PART
OCTAVE
PAGE
6
Common General/Common Effect