Yamaha RXV465 - RX AV Receiver, Руководство пользователя

Страница: 40 / 74

36
En
When using sound field programs for movies or TV
programs (except for Mono Movie), you can select a
surround decoder to be used with the sound field program
after setting the parameters from the following decoders.
To set the parameters for sound field programs, see the
following section.
Decoders that can be used with a sound field
program
• PLIIx Movie (PLII Movie)
• Neo:6 Cinema
Although the field sound programs would satisfy you as
they are with the default parameters, you can arrange
sound effect or decoders suitable for acoustical conditions
of sources or rooms by setting the parameters (sound field
elements).
y
• You can protect the sound field against the changes of parameters the
sound filed parameters when “Memory Guard” of the setup menu is set
to “On” (see page 43). To change the parameters, set it to “Off.”
1
Press
l
SETUP on the remote control.
The setup menu appears on the front panel display.
2
Press
n
Cursor
k
/
n
to select “DSP
Parameter” and press
n
ENTER .
The screen changes as follows.
3
Press
n
Cursor
l
/
h
to select the sound
field program.
4
Press
n
Cursor
k
/
n
to select the parameter
that you want to change, and press
n
Cursor
l
/
h
to change the parameter.
You can change the parameter display in the
following order by pressing
n
Cursor
n
repeatedly.
•
sound field program
• surround decoder
• sound field parameter
For sound field parameters, see “Sound field
parameters” on this page.
y
• Repeat steps 4 and 5 to change other sound field program
parameters.
5
To end the edit, press
n
RETURN .
y
• The default settings are marked with “*.”
DSP Level
Fine adjusts an effect level (level of the sound field effect
to be added). You can adjust the level of the sound field
effect while checking sound levels. Adjust “DSP Level” as
follows.
• The effect sound is too soft.
• There are no differences between effects of the sound
field programs.
→
Increase the effect level.
• The sound is dull.
• The sound field effect is added too much.
→
Reduce the effect level.
■
2ch Stereo only
Direct
Automatically bypasses the DSP circuit and tone control
circuit when an analog sound source is selected as the
input source. You can enjoy a higher quality sound.
■
7ch Stereo only
CT Level
/
SL Level
/
SR Level
/
SB Level
Adjusts the volume of the center (CT), surround L (SL)
surround R (SR) and surround back (SB) channels in the
7ch Stereo program. The available parameters differ
depending on the setting of the speakers.
Editing surround decoders/sound field programs
Selecting a decoder used with a sound
field program
Setting sound field parameters
PRM:Sci-Fi
Sound field program
To initialize the parameters of the selected sound field
program,
n
Cursor
n
repeatedly to select “Initialize”
and then press,
n
Cursor
h
. When “Press Again
h
”
appears on the front panel display, press
n
Cursor
h
again, press
n
Cursor
h
to confirm the initialization
or
n
Cursor
l
to cancel it.
Sound field parameters
CINEMA DSP parameters
Adjustable range: -6 dB
to
0 dB
* to
+3 dB
Parameters only usable in certain sound
field programs
Choices:
Auto
*/
Off
Auto
Outputs sound by bypassing the DSP circuit and
tone control circuit when the “Bass” and “Treble”
tone controls are both set to 0 dB.
Off
Do not bypass the DSP circuit and tone control
circuit.
Adjustable range: 0
to
100%