manualshive.com logo in svg

Yamaha RX10PB, Руководство пользователя

Поделиться
Скачать
Yamaha RX10PB Скачать руководство пользователя страница 39

Control functions

33

To increase the rebound damping force, turn
the adjusting dial in direction (a). To decrease
the rebound damping force, turn the adjusting
dial in direction (b).

ESU13290

Adjusting the compression damping 
force of the rear shock absorber 
(RX10PXT) 

The compression damping force can be ad-
justed by turning the adjusting knob.
To increase the compression damping force,
turn the adjusting knob in direction (a). To de-
crease the compression damping force, turn
the adjusting knob in direction (b). 

NOTICE:

Do not continue to turn the adjusting knob
in direction (a) after it stops. The shock ab-
sorber could be damaged and damping
force adjustments will not be able to be
made. Do not turn the adjusting knob in di-
rection (b) more than 12 click(s). Even if

the adjusting knob is continually turned
after 12 click(s), there will be no change in
the damping force. Be sure to stop the ad-
justing knob at a position where there is a
click.

 [ECS00910]

ESU11047

Adjusting the control rods 

The weight transfer can be adjusted by turn-
ing the adjuster on the control rod (RX10P /
RX10PS) or the adjusting nuts on the control
rods (RX10PXT).

RX10P / RX10PS

1.

Check the control rod length using the
scale on the special wrench as shown.

TIP

In order to obtain a precise measurement, the
special wrench corner should touch the con-
trol rod adjuster, and the locknut must be
turned so that one of its notches aligns with
the wrench allowing the wrench to fit horizon-
tally on the control rod.

1. Rear shock absorber damping force remote 

adjusting dial

2. Standard position

Rebound damping setting:

Minimum (soft):

11 click(s) in direction (b)*

Standard:

Adjusting dial aligned with standard 
position match mark

Maximum (hard):

11 click(s) in direction (a)*

* With the adjusting dial in the standard 

position

(b)

(a)

1

2

1. Compression damping force adjusting knob

Compression damping force setting:

Minimum (soft):

12 click(s) in direction (b)*

Standard:

6 click(s) in direction (b)*

Maximum (hard):

2 click(s) in direction (b)*

* With the adjusting knob fully turned in 

direction (a)

(a)

(b)

1

U8HG11E0.book  Page 33  Wednesday, April 13, 2011  7:40 PM

Содержание RX10PB











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды