Yamaha RX10K Скачать руководство пользователя

Страница: 94 / 105

9-2

2. Open the shroud.

3. Remove the red (+) lead from the lead

holder and move it away from the black
(-) lead.

CAUTION:

Be sure to connect the red (+) jumper
cable to the red (+) lead and the black (-)
jumper cable to the black (-) lead. Do not
reverse the connections.

4. Pull the red (+) lead cover to expose

the terminal through the slit in the
cover, and then connect the red (+)
jumper cable to the red terminal of the
discharged battery.

5. Connect the other end of the red (+)

jumper cable to the positive (+) terminal
of the booster battery.

6. Connect the black (-) jumper cable to

the negative (-) terminal of the booster
battery.

7. Pull the black (-) lead cover to expose

the terminal through the slit in the
cover, and then connect the black (-)
jumper cable to the black terminal of
the discharged battery.

8. Start the engine.
9. Disconnect the black (-) jumper cable

from the black (-) connecting lead, and
then pull the cover completely over the
lead terminal.

10. Disconnect the black (-) jumper cable

from the negative (-) terminal of the
booster battery.

11. Disconnect the red (+) jumper cable

from the positive (+) terminal of the
booster battery.

12. Disconnect the red (+) jumper cable

from the red (+) connecting lead, and
then pull the cover completely over the
lead terminal.

13. Install the red (+) lead into the lead

holder.

E_8fu.book Page 2 Friday, April 9, 2004 10:57 AM

Содержание RX10K










































































































Результаты поиска

Содержание RX10K

Отзывы:

Похожие инструкции для RX10K

Бренды по названию

Популярные бренды

Yamaha RX10K, Руководство пользователя

Результаты поиска

Содержание RX10K

Отзывы:

Похожие инструкции для RX10K

Бренды по названию

Популярные бренды