manualshive.com logo in svg

Yamaha RX10H, Руководство пользователя

Поделиться
Скачать
Yamaha RX10H Скачать руководство пользователя страница 23

5-5

ESU00340

Fuel meter and grip/thumb warmer heat level
indicator

The fuel meter and grip/thumb warmer heat level indica-
tor has eight segments 

1

 which show the amount of fuel

remaining in the fuel tank, the heat level of the grip
warmer, or the heat level of the thumb warmer.

Fuel meter

As the fuel level decreases in the fuel tank, the segments
disappear until the level goes down to the last segment
“E” (Empty). When this occurs, the fuel level warning
indicator 

2

 and the warning light 

3

 come on.

If the fuel level warning indicator and the warning light
come on, fill the fuel tank at the first opportunity.

NOTE:

@ 

The snowmobile must be stopped on a level surface to
obtain an accurate fuel meter reading. The fuel meter
reading changes as the snowmobile moves and depend-
ing on the inclination of the snowmobile. 

@

Grip/thumb warmer heat level indicator

The grip warmer adjustment switch 

1

 and the thumb

warmer adjustment switch 

2

 control the electrically

heated handlebar grips and throttle lever.
To raise the temperature, press each switch to “HI”. To
lower the temperature, press each switch to “LO”.

NOTE:

@ 

●

The grip warmer heat level indicator 

3

 comes on and

the display switches to the grip warmer heat level
when the grip warmer adjustment switch is pressed. 

●

The thumb warmer heat level indicator 

4

 comes on

and the display switches to the thumb warmer heat level
when the thumb warmer adjustment switch is pressed. 

●

The grip/thumb warmer heat level is displayed for 5
seconds after releasing the grip/thumb warmer
adjustment switch, then switches to the fuel meter. 

●

The top segment of the heat level indicator flashes if
the grip/thumb warmer adjustment switches are con-
tinually pressed at the maximum level. The bottom
segment of the heat level indicator flashes if the grip/
thumb warmer adjustment switches are continually
pressed at the minimum level. 

●

Every time the engine is started, the grip/thumb heat
levels return to the maximum levels. 

@

U8FA10.book  Page 5  Monday, June 17, 2002  12:08 PM

Содержание RX10H





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды