Yamaha RX10GTW, Руководство пользователя

Страница: 23 / 102

5-5
Odometer, tripmeter, and barometer modes
Pushing the “SELECT” button 1 switches the display
between the odometer mode “ODO”, tripmeter modes
“TRIP A” and “TRIP B”, and barometer mode “BARO”.
To reset a tripmeter, push the “RESET” button for at least
1 second while the tripmeter is displayed.
NOTE:
@
● To switch the speedometer, odometer, and tripmeter
displays between kilometers and miles, select the
odometer mode “ODO”, and then push the “SELECT”
button for at least 10 seconds while the snowmobile
is stopped.
●
To switch the barometer display between hectopascal
“hPa” and inches of mercury “inHg”, select the
barometer mode “BARO”, and then push the
“SELECT” button for at least 3 seconds while the
snowmobile is stopped.
@
Clock
To set the clock
1. Push the “SELECT” button 1 and “RESET” button 2
simultaneously until the hour digits start flashing.
2. Push the “RESET” button to change the hour setting,
and then push the “SELECT” button. The minute dig-
its will start flashing.
3. Push the “RESET” button to change the minute set-
ting, and then push the “SELECT” button. The clock
starts when the “SELECT” button is released.
NOTE:
@
The clock must be set again when the battery is discon-
nected.
@
Display brightness control
This function allows you to adjust the brightness of the
meter display to suit the outdoor lighting conditions.
E_8gd.book Page 5 Wednesday, April 26, 2006 11:02 AM