FIRMWARE UPDATING PROCEDURE
IMPORTANT NOTICE
Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the
Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by
Yamaha.
Improperly updated products may cause improper operation, and any parts or service required to restore proper
operation will not be covered under the Yamaha Limited Warranty.
Firmware Update Through the Internet
Requirement:
Internet connection
Your receiver is connected to the Internet if you can receive Internet radio stations.
(See owner’s manual for details)
While pressing the
STRAIGHT
button, press the
MAIN ZONE
button and keep
STRAIGHT
button pressed until
“
A D V A N C E D S E T U P
” appears on the front panel display.
*
“
A D V A N C E D S E T U P
” is displayed only for a few seconds.
Turn the
PROGRAM
knob until “
F I R M U P D A T E
” is displayed.
Power off the receiver (Standby mode)
Enter the ADVANCED SETUP mode
Select “FIRM UPDATE” from the menu
1
2
3
A D V A N C E D S E T U P
F I R M U P D A T E
1
RX-V867
