Yamaha RX-V665BL Скачать руководство пользователя страница 70

Страница: 70 / 94

Troubleshooting

If an operation takes longer than usual or an error occurs, one of the following messages may appear on the front panel
display. In this case, read the cause and follow the corresponding remedies.

CH UNAVAIL

The selected channel is not available. The

channel may have been reassigned to a

different channel number. This message

may occur initially with a new XM Mini-

Tuner or an XM Mini-Tuner that has not

received XM’s signal for an extended

period.

Consult the latest channel guide at

http://www.xmradio.com/ for the current list of

channels. For cases of a new XM Mini-Tuner or an

XM Mini-Tuner that has not received XM’s signal for

an extended period, allow the XM Mini-Tuner to

receive the XM satellite signal for at least 5 minutes

and then try to select the channel again.

—

UPGRADE XM TUNER

This unit has detected a XM CNP1000

which is not compatible with this unit.

If you have connected the XM Mini-Tuner

(CNP2000) and see this message, set this unit to

standby, disconnect and reconnect the XM Mini-

Tuner Home Dock and re-install the Mini-Tuner in

the Home Dock and turn on this unit.

If you continue to see this message with the XM

Mini-Tuner, contact XM Satellite Radio at

http://xmradio.com/ or 1-800-XMRADIO (1-800-

967-2346).

If you have an incompatible XM CNP1000, contact

XM for information on upgrading to the XM Mini-

Tuner.

—

- - - -

No artist name or song title is available for

this selection.

No action required.

—

SIRIUS Satellite Radio (U.S.A. model only)

Status message

Cause

Remedy

See

page

ANTENNA ERROR

The antenna is not connected to the

SiriusConnect tuner properly.

Check the connection of the antenna and

SiriusConnect tuner.

SIRIUS LOADING

This unit is communicating with the

SiriusConnect tuner.

The message disappears normally within several tens

of seconds.

—

CHECK SR TUNER

The SiriusConnect tuner is not connected

to the SIRIUS jack of this unit correctly.

Check the connection of the SiriusConnect tuner and

this unit.

The SiriusConnect tuner is not connected

to the AC wall outlet.

Connect the power cable of the SiriusConnect tuner to

the AC wall outlet.

NOT SUPPORTED

This unit does not support the connected

SIRIUS Satellite Radio tuner.

Connect the SiriusConnect tuner that this unit

supports,

ACQUIRING

The signal is too weak.

Adjust the orientation of the antenna of the

SiriusConnect tuner. Use the “Antenna” information

on the front panel display or “SIRIUS Information”

screen in the video monitor to check the antenna

reception level.

UPDATING

The SiriusConnect tuner is updating the

channel list.

Wait until the updating is complete.

—

The period of the subscription is end.

Contact SIRIUS Satellite Radio to renew the

subscription.

F/W UPDATING

The SiriusConnect tuner is updating the

firmware.

Wait until the updating is complete.

—

Status message

Cause

Remedy

See

page

Содержание RX-V665BL






























































































Результаты поиска

Содержание RX-V665BL

Отзывы:

Похожие инструкции для RX-V665BL

Бренды по названию

Популярные бренды

Yamaha RX-V665BL, Руководство пользователя

Результаты поиска

Содержание RX-V665BL

Отзывы:

Похожие инструкции для RX-V665BL

Бренды по названию

Популярные бренды