Quick start guide
10
En
• To use the “TV Viewing” template (Case B), you must connect
a satellite receiver, a cable TV receiver or an HDTV decoder to
this unit in advance. See page 20 for details.
• To use the “Radio Listening” template (Case C), you have to
tune into the desired radio station. See pages 50 to 52 for the
tuning information.
• To achieve the best possible reception, orient the connected AM
loop antenna, or adjust the position of the end of the indoor FM
antenna.
y
If you cannot find the desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 33 for details.
■
After using this unit...
Press
A
MAIN ZONE ON/OFF
to set this unit to
the standby mode.
This unit is set to the standby mode and consumes a small
amount of power in order to receive infrared signals from
the remote control. To turn on this unit from the standby
mode, press the desired
F
SCENE
buttons (or
A
SCENE
) or
A
MAIN ZONE ON/OFF
on the front
panel (or
I
POWER
on the remote control). See page 25
for details.
Notes
What do you want to do with this
unit?
■
Customizing the SCENE templates
• Using various SCENE templates
☞
P. 33
• Creating your original SCENE templates
☞
P. 36
■
Using various input sources
• Basic controls of this unit
☞
P. 37
• Enjoying FM/AM radio programs
☞
P. 50
• Using your iPod with this unit
☞
P. 56
■
Using various sound features
• Using various sound field programs
☞
P. 42
• Using the pure direct mode for high fidelity
sound
☞
P. 48
• Customizing the sound field programs
☞
P. 59
■
Adjusting the parameters of this unit
• Automatically optimizing the speaker
parameters for your listening room
(AUTO SETUP)
☞
P. 28
• Manually adjusting various parameters of
this unit manually
☞
P. 69
• Setting the remote control
☞
P. 82
• Adjusting the advanced parameters
☞
P. 98
■
Additional features
Automatically turning off this unit
☞
P. 41
