Yamaha RX-V620RDS Скачать руководство пользователя страница 34

Страница: 34 / 82

TUNING

Press and hold MEMORY (MAN’L/AUTO FM)
for more than 3 seconds.

The preset number, the “MEMORY” and “AUTO”
indicators flash. Then, after about 5 seconds,
automatic preset tuning begins from the frequency
currently displayed toward the higher frequencies.

When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.

TUNING

MODE

AUTO/MAN'L MONO

MEMORY

MAN'L/AUTO FM

AUTO

FM/AM

Presetting Stations

■

Automatically presetting stations
(for RDS stations)

You can use the automatic preset tuning feature to store
RDS stations. This function enables the unit to
automatically tune in to RDS stations with strong signals,
and to store up to 40 (8 stations x 5 groups) of those
stations in order. This feature enables you to easily tune in
to any preset station by selecting the preset station
number (see “Tuning in to a Preset Station”).

Press FM/AM to select the FM band.

Press TUNING MODE (AUTO/MAN’L MONO)
so that the “AUTO” indicator lights up on the
front panel display.

Notes

• Any stored station data existing under a preset number is

cleared when you store a new station under that preset
number.

• The reception mode is stored along with the station

frequency.

• You can manually replace a preset station with another FM or

AM station by simply following the procedure in the section
“Manually presetting stations”.

• If the number of the received stations does not reach E8,

automatic preset tuning has automatically stopped after
searching all stations.

• Only RDS stations with sufficient signal strength are stored

automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune in to it manually
in the monaural mode, and store it by following the procedure
in “Manually presetting stations”. (There may be a case that
this unit cannot receive a station which could be received by
using the automatic tuning method. This is because this unit
receives a large amount of PI (Program Identification) data
along with the station.)

Automatic preset tuning options

You can select the preset number from which the unit
will store RDS stations and/or begin tuning toward
lower frequencies. Before automatic preset tuning
begins (after pressing MEMORY in step 3):
1. Turn the multi jog knob to select the preset number

under which the first station will be stored.
Automatic preset tuning will stop when stations have
all been stored up to E8.

2. Press PRESET/TUNING (EDIT) to turn off “

” and

then turn the multi jog knob to the left to begin
tuning toward lower frequencies.

Memory back-up

The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.

Lights up

MEMORY

VOLUME

TUNER

MD/CD-R

DVD

D-TV/CBL

VCR 1

VCR2/DVR

V-AUX

AUTO

SILENT