background image

53

English

B

ASIC OPERA

TION

AD
V

ANCED OPERA

TION

APPENDIX

INTRODUCTION

PREP

ARA

TION

SPECIFICATIONS

AUDIO SECTION

• Minimum RMS Output Power

20 Hz to 20 kHz, 0.06% THD, 8 ohms
  Main L/R, Center, Rear L/R ......................................... 70 W*/65 W
1 kHz, 0.09% THD, 8 ohms
  Main L/R, Center, Rear L/R .......................................   80 W*/70 W

• Maximum Output Power (EIAJ)

1 kHz, 10% THD, 8 ohms ........................................................ 100 W

• DIN Standard Output Power

1 kHz, 0.7% THD, 4 ohms ....................................................... 100 W

• IEC Output Power

1 kHz, 0.06% THD, 8 ohms ....................................................... 70 W

• Dynamic Power (IHF)

8/6/4/2 ohms ....................  100/120/140/160 W*, 90/110/130/150 W

• Damping Factor

20 Hz to 20 kHz, 8 ohms ................................................................ 60

• Frequency Response

CD etc. to MAIN L/R ................................ 20 Hz to 20 kHz, ±0.5 dB

• Total Harmonic Distortion (20 Hz to 20 kHz)

CD etc. to MAIN L/R, 1/2 power, 8 ohms ............................  0.025%

• Signal-to-Noise Ratio (IHF-A Network)

CD etc. to MAIN L/R

(150 mV, Input Shorted) ........................................................  96 dB
(250 mV, Input Shorted) ......................................................  100 dB

• Residual Noise (IHF-A Network)

MAIN L/R .............................................................................. 150 

µ

V

• Input Sensitivity/Impedance

CD etc. ................................................................. 150 mV/47 k-ohms
EXT. DECODER ......................................... 150 mV/40 – 47 k-ohms

• Output Level/Impedance

REC OUT ........................................................... 150 mV/1.2 k-ohms
SUBWOOFER ....................................................... 4.0 V/1.2 k-ohms
PHONES ................................................................. 0.47 V/390 ohms

• Channel Separation (Vol. –30 dB)

CD etc. (Input 5.1 k-ohms Terminated, 1 kHz/10 kHz)

..................................................................................... 60 dB/45 dB

• Tone Control Characteristics

BASS: Boost/cut .......................................................... ±10 dB/50 Hz
TREBLE: Boost/cut ................................................... ±10 dB/20 kHz

* for U.S.A. and Canada models

VIDEO SECTION

• Video Signal Type ........................................................... NTSC or PAL

• Video Signal Level ...................................................... 1 Vp-p/75 ohms

• Signal-to-Noise Ratio ..................................................................  50 dB

• Monitor Out Frequency Response .................... 5 Hz to 10 MHz, –3 dB

FM SECTION

• Tuning Range .................................... 87.5/87.50 to 107.9/108.00 MHz

• Usable Sensitivity (DIN)

Mono (S/N 26 dB) ................................................................... 0.9 

µ

V

Stereo (S/N 46 dB) ................................................................... 28 

µ

V

• Selectivity (two signals, 40 kHz Dev., ±300 kHz) ......................  55 dB

• Signal-to-Noise Ratio (Mono/Stereo)

DIN ................................................................................. 75 dB/69 dB
IHF ................................................................................. 81 dB/75 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo ........................................................................  0.1/0.2%

• Stereo Separation (1 kHz) ...........................................................  48 dB

• Frequency Response ........................................ 20 Hz to 15 kHz, ±1 dB

• Antenna Input ...................................................... 75 ohms, Unbalanced

AM SECTION

• Tuning Range ............................................ 530/531 to 1,710/1,611 kHz

• Usable Sensitivity .................................................................  300 

µ

V/m

• Signal-to-Noise Ratio ................................................................... 52 dB

• Antenna ........................................................................... Loop antenna

GENERAL

• Power Supply

[U.S.A. and Canada models] ..................................  AC 120 V, 60 Hz
[Europe, U.K. and Singapore models] .................... AC 230 V, 50 Hz
[Australia model] ..................................................... AC 240 V, 50 Hz
[China model] .........................................................  AC 220 V, 50 Hz
[General model] ............................. AC 110/120/220/240 V, 50/60 Hz

• Power Consumption ......................................................  approx. 220 W

• AC Outlets (100 W max. total)

[U.K. and Australia models] ..................................... 1 (SWITCHED)
[Other models] .......................................................... 2 (SWITCHED)

• Dimensions (W x H x D)

..................... 435 x 151 x 391 mm (17-1/8’’ x 5-15/16’’ x 15-3/8’’)

• Weight ............................................................................ 10 kg (22 lbs.)

• Accessories ................................................................  AM loop antenna

.......................................................................... Indoor FM antenna
..................... 75-ohm/300-ohm antenna adapter (U.K. model only)
........................ Antenna adapter (U.S.A. and Canada models only)
................................................................................. Remote control
........................................................................................... Batteries

Specifications are subject to change without notice.

0110V496RDS50-55_EN

9/28/0, 4:42 PM

53

Содержание RX-V496RDS



































































Отзывы: