Yamaha RX-V383BL Скачать руководство пользователя страница 76

Страница: 76 / 88

Error indications on the front display

Refer to the table below when the error message is indicated on the front display.

Message

Cause

Remedy

Access error

The unit cannot access the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

Check SP Wires

The speaker cables short circuit.

Twist the bare wires of the cables firmly and connect to the unit and speakers properly.

Internal Error

An internal error has occurred.

Contact the nearest authorized Yamaha dealer or service center.

No content

There are no playable files in the selected folder.

Select a folder that contains files supported by the unit.

Not found

The Bluetooth device is not found.

• Place the Bluetooth device within 10 m (32 ft) of the Bluetooth receiver.
• Perform pairing again.

RemID Mismatch

The remote control IDs of the unit and the remote control are not
identical.

Change the remote control ID of the unit or the remote control (p.67).

Содержание RX-V383BL

























































































Результаты поиска

Содержание RX-V383BL

Отзывы:

Похожие инструкции для RX-V383BL

Бренды по названию

Популярные бренды

Yamaha RX-V383BL, Руководство пользователя

Результаты поиска

Содержание RX-V383BL

Отзывы:

Похожие инструкции для RX-V383BL

Бренды по названию

Популярные бренды