Yamaha RX-V383BL, Руководство пользователя

Страница: 67 / 88

Selecting the remote control ID (REMOTE ID)
ENHANCER
LINK
ECO
MASTER
OUT 2 -R es Hi YPAO VOL. A - DRC
SLEEP
STEREO
PARTY
TUNED ZONE
3 B 2 A
VOL.
FPR
SL SW SR
SBL SB SBR
FPL
MUTE VIRTUAL
REMOTE ID••ID1
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with
a unique remote control ID for its corresponding receiver.
Settings
ID1, ID2
n
Changing the remote control ID of the remote control
1
To select ID1, while holding down the cursor key (
e
), hold down
SCENE (BD/DVD) for more than 3 seconds.
To select ID2, while holding down the cursor key (
e
), hold down
SCENE (TV) for more than 3 seconds.
Changing the FM/AM tuning frequency setting (TU)
(Asia, Taiwan and General models only)
ENHANCER
LINK
ECO
MASTER
OUT 2 -R es
Hi YPAO VOL. A - DRC
SLEEP
STEREO
PARTY
TUNED ZONE
3 B 2 A
VOL.
FPR
SL SW SR
SBL SB SBR
FPL
MUTE VIRTUAL
TU••••FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
Settings
FM100/AM10
Select this when you want to adjust the FM frequency by 100-kHz steps
and AM by 10-kHz steps.
FM50/AM9
Select this when you want to adjust the FM frequency by 50-kHz steps
and AM by 9-kHz steps.
Switching the video signal type (TV FORMAT)
ENHANCER
LINK
ECO
MASTER
OUT 2 -R es Hi YPAO VOL. A - DRC
SLEEP
STEREO
PARTY
TUNED ZONE
3 B 2 A
VOL.
FPR
SL SW SR
SBL SB SBR
FPL
MUTE VIRTUAL
TV FORMAT•NTSC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
Settings
NTSC, PAL
Default
U.S.A., Canada, Korea, Taiwan and General models: NTSC
Other models: PAL
En
67