Yamaha RX-V373BL Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 83

background image

APPENDIX

➤

Troubleshooting

En

70

Video

FM/AM radio

Noise/hum is heard.

The unit is too close to another digital or radio frequency device.

Move the unit further away from the device.

The cable connecting the unit and playback device is defective.

If there is no problem with the connection, replace with another cable.

The sound is distorted.

A device connected to the unit’s output jacks is not turned on. (This
may happen due to the nature of AV receivers.)

Turn on all devices connected to the unit’s output jacks.

Problem

Cause

Remedy

No video.

Another input source is selected on the unit.

Select an appropriate input source with the input selection keys.

Another input source is selected on the TV.

Switch the TV input to display the video from the unit.

The video signal output from the unit is not supported by the TV.

Check the video output setting of the playback device. For information about
video signals supported by the TV, refer to the instruction manuals for the TV.

The cable connecting the unit and TV (or playback device) is
defective.

If there is no problem with the connection, replace with another cable.

No video from the playback device (connected to
the unit with HDMI).

The input video signal (resolution) is not supported by the unit.

To check the information about the current video signal (resolution), use “Signal
Info” in the “Option” menu (p.53). For information about video signals supported
by the unit, see “HDMI signal compatibility” (p.76).

The TV does not support HDCP (High-bandwidth Digital Content
Protection).

Refer to the instruction manuals for the TV and check the TV’s specifications.

The number of devices connected to the HDMI OUT jack is over
the limit.

Disconnect some of the HDMI devices.

The menu of the unit is not displayed on the TV.

The TV is not connected to the unit via HDMI.

You can display the menu of the unit on the TV only when they are connected with
an HDMI cable. If necessary, use an HDMI cable to connect them (p.18 t o 21).

Another input source is selected on the TV.

Switch the TV input to display the video from the unit (HDMI OUT jack).

Problem

Cause

Remedy

FM radio reception is weak or noisy.

There is multi-path interference.

Adjust the FM antenna height or orientation, or place it in a different location.

Your area is too far from the FM station transmitter.

Press MODE to select monaural FM radio reception (p.40).

Use an outdoor FM antenna. We recommend using a sensitive multi-element
antenna.

AM radio reception is weak or noisy.

The noises may be caused by fluorescent lamps, motors,
thermostats, or other electrical equipment.

It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.

Problem

Cause

Remedy

«
...
68
69
70
71
72
...
»

Содержание RX-V373BL




















































































Отзывы:

Нет отзывов

Похожие инструкции для RX-V373BL

Бренд: Cambridge Audio Страницы: 30

Бренд: Cambridge Audio Страницы: 9

Бренд: Cambridge Audio Страницы: 51

Бренд: Cambridge Audio Страницы: 55

Бренд: L&S Страницы: 5

Бренд: Yaesu Страницы: 4

SAINT MALO RCM 127

Бренд: Blaupunkt Страницы: 23

Бренд: Sennheiser Страницы: 32

Бренд: SpeakerCraft Страницы: 5

Бренд: Icom Страницы: 40

Бренд: Brigmton Страницы: 38

Бренд: JETStream Страницы: 62

Бренд: Sennheiser Страницы: 2

Бренд: Dual Страницы: 20

Бренд: Prology Страницы: 17

Бренд: AERF Страницы: 2

Бренд: Linx Страницы: 24

Бренд: Yaesu Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды